BYZMZ - VLP F-631
- MSDS: BYZMZ
- Manufacturer: PDI INC
- Product Name: VLP F-631
- National Stock Number: 8030-00N063857
Product Identification
Product ID:VLP F-631
MSDS Date:10/01/1994
FSC:8030
NIIN:00N063857
MSDS Number: BYZMZ
Responsible Party
CIRCLE PINES, MN 55014
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 612-785-2156
Preparer: THOMAS MILLER
Cage: 0B629
Contractor
Telephone: 612-785-2156
Cage: 0B629
Ingredients
FURAN, TETRAHYDRO-; (TETRAHYDROFURAN) (CERCLA)
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 60.2%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM;250 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 18.9%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM;300 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANONE (CERCLA)
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 2.4%
OSHA PEL 50 PPM, S
ACGIH TLV: 25 PPM, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RESINS
Fraction By Weight: 18.5%
OSHA PEL N/K
ACGIH TLV: N/K
6.27 LBS/GAL.
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HEADACHE, DIZZINESS, DROWSINESS,
FATIGUE, IRREGULAR HEARTBEAT, SKIN & EYE IRRITATION. CHRONIC:BRAIN
& NERVOUS SYSTEM DAMAGE (REFERRED TO AS SOLVENTS OR PAINTER
SYNDROME). DRYING OR CRACKING OF S KIN. TARGET ORGANS:CNS, CVS,
PNS, LIVER, KIDNEYS, LUNGS, RESPIRATORY SYSTEM, SKIN & EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING HEART, LIVER, KIDNEY &
LUNG DISORDERS.
First Aid
First Aid:INGEST:CONTACT MD OR POISON CONTROL IMMEDIATELY. INHAL:REMOVE
TO FRESH AIR. ADMINISTER OXYGEN OR ARTIFICIAL RESPIRATION IF
NECESSARY. EYE:FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. IF IRR ITATION PERSISTS, CONTACT MD. SKIN:WASHW/SOAP &
WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:<20F,<-7C
Lower Limits:1%
Upper Limits:11.8%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE & MAY BE
IGNITED BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY.
Accidental Release
Spill Release Procedures:WIPE UP W/FLOOR ABSORB. TRANSFER TO HOOD.
PREVENT RUN OFF TO SEWERS. ELIMINATE ALL SOURCES OF IGNITION.
VENTILATE TO MAINTAIN EXPOSURE BELOW PEL'S. USE SAND OR OTHER MATL
TO DAM OR CONTAIN SPILLS. IF LARGE SPILL, NOTIFY APPROP STATE &
LOC AGENCIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SPARKS, FLAME & HEAT
SOURCES. DO NOT STORE ABOVE 120F. STORE THIS PRODUCT W/ADEQUATE
VENTILATION.
Other Precautions:AVOID INHALATION OF VAPORS & PERSONAL CONTACT
W/LIQUID PRODUCT. USE GOOD PERSONAL HYGIENE. KEEP CONTAINER CLOSED
WHEN NOT IN USE. ALL CONTAINERS SHOULD BE DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER I/A/W GOVERNMENTAL REGULATIONS.
Exposure Controls
Respiratory Protection:DEPENDING ON THE AIRBORNE CONCENTRATION, USE A
NIOSH/MSHA APPROVED RESPIRATOR OR GAS MASK W/APPROPRIATE CARTRIDGE
& CANNISTER, OR SUPPLIED AIR EQUIPMENT.
Ventilation:LOCAL EXHAUST:SUPPLEMENTAL (IF NEEDED). MECHANICAL
(GENERAL):TO MAINTAIN EXPOSURE BELOW PEL'S.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . IMPERVIOUS CLOTHING/BOOTS AS NEEDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING PRODUCT.
Supplemental Safety and Health
MATLS TO AVOID:EARTH HYDROXIDES.
Chemical Properties
Boiling Pt:B.P. Text:>151F,>66C
Vapor Pres:129 @ 20C
Vapor Density:3
Spec Gravity:0.9-0.92
Evaporation Rate & Reference:4.7 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID; STRONG SOLVENT ODOR.
Percent Volatiles by Volume:82
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, OXIDIZING AGENTS, SELECTED AMINES W/ALKALI METALS
& HALOGENS. ALUMINUM HYDRIDE & ALKALINE (SUPDAT)
Stability Condition to Avoid:TEMPERATURES >350F FOR OVER 10 MINUTES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDES,
HYDROGEN CHLORIDE & ORGANIC HYDROCARBONS.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, COUNTY, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.